Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 Aug Microsoft Official New Released 70-413
100% Free Download! 100% Pass Guaranteed!

Designing and Implementing a Server Infrastructure

Question No: 81 DRAG DROP – (Topic 9)

Your network contains three servers named Server1, Server2, and Server3 that run Windows Server 2012. Server3 is connected to a disk storage array.

You need to ensure that Server1 can store files on the storage array. The solution must ensure that Server1 can access the storage as a local disk.

What should you configure on each server?

To answer, drag the appropriate configuration to the correct location in the answer area. Each configuration may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.

Dumps4Cert 2018 PDF and VCE

Answer:

Dumps4Cert 2018 PDF and VCE

Explanation:

Dumps4Cert 2018 PDF and VCE

Box 1: iSCSI Initiator Service

Services that depend on iSCSI devices

Devices that are connected to a computer through Microsoft iSCSI Initiator are presented to the Windows operating system later in the boot process than direct-attached storage. There are applications and services that make assumptions about the timing of the availability of the devices. The Microsoft iSCSI Initiator service and the Service Control Manager in the Windows operating system help these applications and services synchronize with information about the devices and volumes that are hosted on iSCSI targets.

Box 2: iSCSI Target Server role service

With iSCSI Target Server, any computer running Windows Server 2012 can become a storage device.

Step 1: Install iSCSI Target Server and failover clustering Step 2: Configure the iSCSI initiator

Step 3: Create the high availability iSCSI Target Server role service Step 4: Configure iSCSI storage provider identity credentials

Question No: 82 DRAG DROP – (Topic 9)

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2008 R2. Server1 is a file server.

You deploy a new member server named Server2 that runs Windows Server 2012.

You plan to migrate file shares from Server1 to Server2. File share and NTFS permissions are assigned only to domain local groups.

You need to identify which actions are required to perform the migration. Which five actions should you identify?

To answer, move the five appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Dumps4Cert 2018 PDF and VCE

Answer:

Dumps4Cert 2018 PDF and VCE

Explanation:

Box 1: On Server2, install the Windows Server Migration Tools.

Box 2: On Server2, create a deployment folder.

Box 3: On Server1, register the Windows Server Migration Tools. Box 4: On Server2, run the Receive-SmigServerDatacmdlet.

Box 5: On Server1, run the Send-SmigServerDatacmdlet.

Note:

  • Windows Server Migration Tools installation and preparation can be divided into the following stages.

    1. (box 1) Installing Windows Server Migration Tools on destination servers that run Windows Server 2012.

    2. (Box 2) Creating deployment folders on destination servers that run Windows Server 2012, for copying to source servers.

    3. Copying deployment folders from destination servers to source servers. 4.(Box 3) Registering Windows Server Migration Tools on source servers.

  • Registering Windows Server Migration Tools on source computers

    Before you can use a technology’s Windows PowerShell snap-in for the first time, it must be registered with Windows PowerShell. You can use SmigDeploy.exe to register the Windows Server Migration Tools snap-in on a migration source computer

  • (box 54 Receive-SmigServerData (Receive must be send)

    This cmdlet allows a target server to receive shares, folders, files, and associated permissions and share properties that are migrated from a source server. Receive- SmigServerData must be running on the destination server at the same time that the Send- SmigServerDatacmdlet is running on the source server.

  • (box 5) Send-SmigServerData (Send must be after receive)

This cmdletmigrates folders, files, and associated permissions and share properties from the local server to a target server. Send-SmigServerData must be run on the source server at the same time that the Receive-SmigServerDatacmdlet is running on the destination server.

Question No: 83 – (Topic 9)

Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2008 R2. All domain controllers are installed on physical servers. The network contains several Hyper-V hosts.

The network contains a Microsoft System Center 2012 infrastructure.

You plan to use domain controller cloning to deploy several domain controllers that will run Windows Server 2012.

You need to recommend which changes must be made to the network infrastructure before you can use domain controller cloning.

What should you recommend?

  1. Upgrade a global catalog server to Windows Server 2012. Deploy Virtual Machine Manager (VMM).

  2. Upgrade a global catalog server to Windows Server 2012. Install the Windows Deployment Services server role on a server that runs Windows Server 2012.

  3. Upgrade the domain controller that has the PDC emulator operations master role to Windows Server 2012. Deploy a Hyper-V host that runs Windows Server 2012.

  4. Upgrade the domain controller that has the infrastructure master operations master role to Windows Server 2012. Install the Windows Deployment Services server role on a server that runs Windows Server 2012.

Answer: C

Explanation: We need to deploy Hyper-V host on Windows Server 2012, and there must also be a PDC emulator running Windows Server 2012.

Note: The requirements for domain controller cloning are:

  • The hypervisor must support VM-GenerationID. Hyper-V running on Windows Server 2012 supports this feature. Other virtualization vendors will have the ability to implement this as well, so check with your vendor to see if it’s supported.

  • The source virtual DC must be running Windows Server 2012.

  • The PDC emulator role holder must be online and available to the cloned DC and must be running Windows Server 2012.

Reference: Virtual Domain Controller Cloning in Windows Server 2012

https://blogs.technet.microsoft.com/askpfeplat/2012/10/01/virtual-domain-controller-cloning- in-windows-server-2012/

Question No: 84 – (Topic 9)

Your network contains an Active Directory domain named contoso.com. The domain contains three VLANs. The VLANs are configured as shown in the following table.

Dumps4Cert 2018 PDF and VCE

All client computers run either Windows 7 or Windows 8.

The corporate security policy states that all of the client computers must have the latest security updates installed.

You need to implement a solution to ensure that only the client computers that have all of the required security updates installed can connect to VLAN 1. The solution must ensure that all other client computers connect to VLAN 3.

Solution: You implement the DHCP Network Access Protection (NAP) enforcement method.

Does this meet the goal?

  1. Yes

  2. No

Answer: A

Explanation: Implementing DHCP NAP to Enforce WSUS Updates

Question No: 85 – (Topic 9)

Your network contains an Active Directory domain named contoso.com. The domain contains 10 sites. The sites are located in different cities and connect to each other by using low-latency WAN links.

In each site, you plan to implement Microsoft System Center 2012 Configuration Manager and to deploy multiple servers.

You need to recommend which Configuration Manager component must be deployed to each site for the planned deployment.

What should you include in the recommendation?

More than one answer choice may achieve the goal. Select the BEST answer.

  1. A management point

  2. A software update point

  3. A distribution group point

  4. A secondary site server that has all of the Configuration Manager roles installed

Answer: C Explanation:

Distribution point groups provide a logical grouping of distribution points and collections for content distribution.

A Distribution point group is not limited to distribution points from a single site, and can contain one or more distribution points from any site in the hierarchy. When you distribute content to a distribution point group, all distribution points that are members of the distribution point group receive the content.

Reference: Configuring Distribution Point Groups in Configuration Manager https://technet.microsoft.com/en-us/library/hh427335.aspx

Question No: 86 – (Topic 9)

Your network contains multiple servers that run Windows Server 2012. All client computers run Windows 8.

You need to recommend a centralized solution to download the latest antivirus definitions for Windows Defender.

What should you include in the recommendation?

  1. Microsoft System Center 2012 Endpoint Protection

  2. Network Access Protection (NAP)

  3. Microsoft System Center Essentials

  4. Windows Server Update Services (WSUS)

    Answer: D Explanation:

    To use WSUS to deploy Windows Defender definition updates to client computers, follow these steps:

    1. Open the WSUS Administrator console, and then click Options at the top of the console.

    2. Click Synchronization Options.

    3. Under Products and Classifications, click Change under Products.

    4. Verify that the Windows Defender check box is selected, and then click OK.

    5. Under Products and Classifications, click Change under Update Classifications.

    6. Verify that the Definition Updates check box is selected, and then click OK.

    7. Optional Update the automatic approval rule. To do this, follow these steps:

      1. At the top of the console, click Options.

      2. Click Automatic Approval Options.

      3. Make sure that the Automatically approve updates for installation by using the following rule check box is selected.

      4. Under Approve for Installation, click Add/Remove Classification.

      5. Verify that the Definition Updates check box is selected, and then click OK.

    8. At the top of the console, click Options.

    9. Click Synchronization Options.

    10. On the taskbar on the left, click Synchronize now.

    11. At the top of the console, click Updates.

    12. Approve any Windows Defender updates that WSUS should deploy.

Reference: How to use Windows Server Update Services (WSUS) to deploy definition updates to computers that are running Windows Defender

https://support.microsoft.com/en-us/kb/919772

Question No: 87 DRAG DROP – (Topic 9)

You manage an Active Directory Domain Services forest that contains a root domain named contoso.com and a child domain named branch.contoso.com. You have three servers named SRV01, SRV02, and SRV03. All servers run Windows Server 2012 R2. SRV01 and SRV02 are domain controllers for the domain contoso.com. SRV03 is the domain controller for branch.contoso.com. User accounts and resources exist in both domains. All resources in branch.contoso.com are physically located in a remote branch

office.

The remote branch office must be configured as Read-Only Domain Controller (RODC). The solution must minimize the impact on users and the number of servers deployed in the branch office.

You need to configure the environment.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Dumps4Cert 2018 PDF and VCE

Answer:

Dumps4Cert 2018 PDF and VCE

Explanation:

Dumps4Cert 2018 PDF and VCE

C:\Users\Kamran\Desktop\image – Copy.jpg

Box 1: We export all resources from the branch office, and import them into the main domain.

Ldidfe creates, modifies, and deletes directory objects. You can also use ldifde to extend the schema, export Active Directory user and group information to other applications or services, and populate Active Directory Domain Services (AD DS) with data from other directory services.

Box 2: We decommission the domain controller SRV03 Box 3: And make it a RODC instead.

Incorrect:

We should not use an additional server SRV04.

Question No: 88 – (Topic 9)

Your company has a main office.

The network contains an Active Directory domain named contoso.com. The main office contains a server named Server1 that runs Windows Server 2012. Server1 has the Remote Access server role installed and is configured to accept incoming SSTP-based VPN connections.

All client computers run Windows 7.

The company plans to open a temporary office that will contain a server named Server2 that runs

Windows Server 2012 and has the DHCP Server server role installed. The office will also have 50 client computers and an Internet connection.

You need to recommend a solution to provide the users in the temporary office with access to the resources in the main office.

What should you recommend?

More than one answer choice may achieve the goal. Select the BEST answer.

  1. Use the Connection Manager Administration Kit (CMAK) to create a connection package that specifies Server1 as the target for SSTP-based VPN connections. Manually distribute the CMAK package to each client computer in the temporary office.

  2. Install the Remote Access server role on Server2. From Routing and Remote Access on Server2, add a SSTP-based VPN port. From DHCP on Server2, configure the default gateway server option.

  3. Uses the Connection Manager Administration Kit (CMAK) to create a connection package that specifies Server1 as the target for SSTP-based VPN connections. Use a Group Policy object

    (GPO) to distribute the CMAK package to each client computer in the temporary office.

  4. Install the Remote Access server role on Server2. From Routing and Remote Access on Server2, configure a demand-dial interface. From DHCP on Server2, configure the default gateway server option.

Answer: A Explanation:

CMAK is used for simplifying the deployment of VPN client-connection setup. With CMAK we create the VPN profile in executable file format, and then distribute it to the clients.

Note: Connection Manager is a client network connection tool that allows a user to connect to a remote network, such as an Internet service provider (ISP), or a corporate network protected by a virtual private network (VPN) server.

Incorrect:

Not B: SSTP is not used for site-to-site connections.

Not C: The remote temporary office is not connected to the domain yet, so distribution through a GPO would not work.

Not D: As Server1 is configured with SSTP remote dialing cannot be right.

Reference: Connection Manager Administration Kit https://technet.microsoft.com/en-us/library/cc752995.aspx

Question No: 89 – (Topic 9)

Your network contains 50 servers that run Windows Server 2003 and 50 servers that run Windows Server 2008.

You plan to implement Windows Server 2012 R2.

You need to create a report that includes the following information:

->The servers that run applications and services that can be moved to Windows Server 2012 R2

->The servers that have hardware that can run Windows Server 2012 R2

->The servers that are suitable to be converted to virtual machines hosted on Hyper- V hosts that run Windows Server 2012 R2

Solution: You install Windows Server 2012 R2 on a new server, and then you run Microsoft Deployment Toolkit (MDT) 2012.

Does this meet the goal?

  1. Yes

  2. No

Answer: B

Explanation: Microsoft Deployment Toolkit (MDT) 2013 allows you to automate the deployment of computers in your organization, but it does not include reporting.

Question No: 90 – (Topic 9)

Your network contains an Active Directory forest named contoso.com. The forest contains a single domain and two sites named Montreal and Vancouver.

Montreal contains an IP Address Management (IPAM) server named Server1 that is used to manage all of the DHCP servers and the DNS servers in the site.

Vancouver contains several DHCP servers and several DNS servers.

In Vancouver, you install the IP Addreontreal contains an IP address Management (IPAM) server named Server1 that ifeature on a server named Server2.

You need to recommend which configurations must be performed to ensure that the DHCP servers and the DNS servers in Vancouver are managed by Server2.

What should you recommend?

  1. Replicate the IPAM database from Server1 to Server2. On Server2, change the manageability status of the DNS servers and the DHCP servers in Vancouver.

  2. Replicate the IPAM database from Server1 to Server2. On Server1, change the manageability status of the DNS servers and the DHCP servers in Vancouver.

  3. From Server2, run the Invoke-IpamGpoProvisioning cmdlet On Server2, change the manageability status of the DNS servers and the DHCP servers in Vancouver.

  4. From Server1, run the Invoke-IpamGpoProvisioning cmdlet. On Server1, change the manageability status of the DNS servers and the DHCP servers in Vancouver.

Answer: C

Explanation: Invoke-IpamGpoProvisioning

Creates and links group policies in the specified domain for provisioning required access settings on the servers managed by the computer running the IPAM server.

Reference: Invoke-IpamGpoProvisioning https://technet.microsoft.com/en-us/library/jj553805(v=wps.630).aspx

100% Dumps4cert Free Download!
70-413 PDF
100% Dumps4cert Pass Guaranteed!
70-413 Dumps

Dumps4cert ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.