Ensurepass.com : Ensure you pass the IT Exams
2018 Aug Microsoft Official New Released 70-680
100% Free Download! 100% Pass Guaranteed!

TS: Windows 7, Configuring

Question No: 201 – (Topic 3)

You have a computer that runs Windows 7.

A user installs a third-party media player on the computer.

You discover that all media files automatically open by using the third-party media player. You need to ensure that all media files open automatically by using Windows Media Player. You must achieve this goal by using the minimum amount of administrative effort.

What should you do?

  1. Select a media file. Right-click the file and select open with.

  2. Select a media file. Right-click the file and select Restore previous versions.

  3. From Control Panel, modify the Set your default programs settings.

  4. From Control Panel, modify the Set program access and computer defaults settings.

Answer: C

Question No: 202 – (Topic 3)

You have a computer that runs Windows 7.

You have an application control policy on the computer.

You discover that the policy is not enforced on the computer.

You open the Services snap-in as shown in the exhibit. (Click the Exhibit button.)

Ensurepass 2018 PDF and VCE

You need to enforce the application control policy on the computer. What should you do?

  1. Set the Application Identity service Startup Type to Automatic and start the service.

  2. Set the Application Information service Startup Type to Automatic and start the service.

  3. Set the Application Management service Startup Type to Automatic and start the service.

  4. Set the Application Experience service Startup Type to Automatic and start the service.

Answer: A Explanation:

Application Identity service

AppLocker relies upon the Application Identity Service being active. When you install Windows 7, the startup type of this service is set to Manual. When testing AppLocker, you should keep the startup type as Manual in case you configure rules incorrectly. In that event, you can just reboot the computer and the AppLocker rules will no longer be in effect. Only when you are sure that your policies are applied correctly should you set the startup

type of the Application Identity Service to Automatic. You should take great care in testing AppLocker rules because it is possible to lock down a computer running Windows 7 to such an extent that the computer becomes unusable. AppLocker policies are sometimes called application control policies

Question No: 203 – (Topic 3)

You have a Windows image (WIM) file that contains an image of Windows 7. The WIM file is 2 GB.

You need to ensure that you can copy the image to CD. What should you do?

  1. Run Imagex.exe and specify the /split parameter.

  2. From the properties of the WIM file, enable compression.

  3. Run Dism.exe and specify the /cleanup-wim parameter.

  4. Right-click the WIM file, point to Send To and then click Compressed (zipped) Folder.

Answer: A Explanation: Imagex

ImageX is a command-line tool that enables original equipment manufacturers (OEMs) and corporations to capture, to modify, and to apply file-based disk images for rapid deployment. ImageX works with Windows image (.wim) files for copying to a network, or it can work with other technologies that use .wim images, such as Windows Setup, Windows Deployment Services (Windows DS), and the System Management Server (SMS) Operating System Feature Deployment Pack.

/split image_filedest_filesize

Splits an existing .wim file into multiple read-only split .wim files (.swm).

image_file

Specifies the name and location of the .wim file to split.

dest_file

Specifies the file path of the split files.

SizeSpecifies the maximum size in megabytes (MB) for each created file. This option generates the .swm files into the specified directory, naming each file the same as the specified image_file, but with an appended number and the .swm file-name extension. For example, if you choose to split a file named Data.wim, this option creates a Data.swm file, a Data2.swm file, a Data3.swm file, and so on, defining each portion of the split .wim file.

Question No: 204 – (Topic 3)

You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to install Windows 7 on the computer by using the DVD installation media and receive the following error message: “Reboot and Select proper Boot device or Insert Boot Media in selected Boot device.quot;

You need to ensure that you can install Windows 7 on the computer by using the DVD installation media.

What should you do?

  1. From the BIOS, modify the startup order.

  2. From the BIOS, enable Pre-Boot Execution Environment (PXE).

  3. Create an answer file named oobe.xml and place the file on the hard disk drive.

  4. Create an answer file named autounattend.xml and place the file on the hard disk drive.

Answer: A

Explanation: To install Windows 7 from a DVD-ROM, boot from the DVD-ROM drive and follow the prompts. You may need to configure the computer’s BIOS to support booting from DVD-ROM. If a computer does not have a DVD-ROM drive attached, you can still install from DVD-ROM-you just need to acquire a USB DVD-ROM drive. In this case, it will be necessary to configure the computer’s BIOS to boot from the USB device.

Question No: 205 – (Topic 3)

You have a computer that runs Windows 7. The computer is a member of an Active Directory domain and has a shared printer. Users report that they can print to the shared

printer, but they cannot delete their print jobs.

You need to ensure that users can delete their own print jobs. What should you do?

  1. Restart the Print Spooler service.

  2. Stop sharing the local printer and then share it again.

  3. Assign the Manage Documents permission to SYSTEM.

  4. Assign the Manage Documents permission to CREATOR OWNER.

Answer: D Explanation: Manage Documents

The user can pause, resume, restart, cancel, and rearrange the order of documents submitted by all other users. The user cannot, however, send documents to the printer or control the status of the printer. By default, the Manage Documents permission is assigned to members of the Creator Owner group. When a user is assigned the Manage Documents permission, the user cannot access existing documents currently waiting to print. The permission will only apply to documents sent to the printer after the permission is assigned to the user.

Question No: 206 – (Topic 3)

You plan to deploy Windows 7 by using a virtual hard disk (VHD).

You need to ensure that when a computer starts from the VHD, the Windows 7 installation programs will run the out-of-box-experience (OOBE) portion of the setup.

What should you do?

  1. Copy install.wim from the Windows 7 installation media to the VHD.

  2. Use ImageX to apply install.wim from the Windows 7 installation media to the VHD.

  3. Start the computer by using the Windows 7 installation media and then select Install now.

  4. Start the computer by using the Windows Preinstallation Environment (Windows PE) and then run Diskprep.exe.

    Answer: B Explanation:

    WIM images are file-based and can be installed on a VHD or placed on a network share for distribution. You can store several images in the same WIM file.

    Talks about Capturing the Installation onto a Network Share, but still applies.

    You can capture an image of your reference computer by using Windows PE and the ImageX tool. Then you store that image on a network share. Alternatively, on a computer running Windows 7 Enterprise or Ultimate edition, you can store the image on a VHD and make that VHD bootable. To capture the installation image you have created on your reference computer to a network share, perform the following procedure:

    1. Insert your Windows PE media into your reference computer and restart the computer. As before, you may have to override the boot order to boot from the CD/DVD-ROM drive. If so, select the appropriate function key to override the boot order during initial boot.

    2. Windows PE starts and opens a command-prompt window. Use the ImageX tool located on your Windows PE media to capture an image of your reference computer installation. For example, if your optical drive is drive E:, your installation is on drive C:, and you want to capture the image on drive D:, you would enter: e:\imagex.exe /capture C: d:\installationimage.wim quot;my Win7 Installquot; /compress fast /verify

    3. Copy the image to a network location. For example, enter: net use y:

      \\network_share\images copy d:\myimage.wim y:

    4. If necessary, provide network credentials for appropriate network access. Your image is now on volume Y:

      Question No: 207 – (Topic 3)

      You have a computer that runs Windows 7. The computer has two drives named C and D. Windows Backup is scheduled to run every day. The scheduled backup backs up a system image, all user, files, and drive D. Drive D fails. You replace the drive with a new drive. You need to recover the data on drive D by using the minimum amount of administrative effort. The solution must minimize downtime.

      What should you do?

      1. From Backup and Restore, click Restore all users files.

      2. From the properties of drive D, restore all previous versions.

      3. Open System Restore and apply the latest restore point.

      4. Start the computer from a system repair disc and restore a system image.

Answer: A

Question No: 208 – (Topic 3)

Your network contains computers that run either Windows Vista (x86) or Windows 7 (x86). All computers are joined to a domain.

You install a computer named Computer1 that runs Windows 7 (64-bit). You share a printer named Printer1 on Computer1.

You need to ensure that any user can automatically download and install the drivers for Printer1.

What should you do from Printer Properties?

  1. Install a new driver.

  2. Enable bidirectional support.

  3. Modify the Additional Drivers settings.

  4. Assign the Manage this printer permission to the Domain Users group.

Answer: C Explanation:

If you are going to be sharing a printer with computers running previous versions of Microsoft Windows, you can add the drivers for the printer using Additional Drivers. When you add additional drivers, other computers on the network that do not have the printer drivers installed are able to download them from the computer that is sharing the printer.

Question No: 209 – (Topic 3)

You have a computer that runs Windows 7.

You need to prevent users from installing a specific removable drive on the computer.

You connect the removable drive to the computer. What should you do before you create a Group Policy?

  1. From Device Manager, identify the device class GUID.

  2. From Device Manager, identify the device location information.

  3. From System Information, identify the device INF file.

  4. From System Information, identify the device driver file name.

Answer: A Explanation:

The device class GUID is used to identify the device. Prevent Windows 7 from installing or updating device drivers whose device setup class GUIDs you specify. This policy overrides any other policy that permits update or installation.

Question No: 210 – (Topic 3)

You download a Windows PowerShell snap-in.

You need to ensure that the snap-in is automatically imported when you open a new PowerShell session.

What should you do?

  1. Modify the PowerShell execution policy.

  2. Create a new PowerShell manifest file. Update the PowerShell shortcut and specify the file option.

  3. Create a new PowerShell console file. Update the PowerShell shortcut and specify the psconsolefile option.

  4. Create a new PowerShell formatting and type file. Copy the file to the

%SystemRoot%\system32 \WindowsPowerShell\v1.0 folder.

Answer: C Explanation: PSConsoleFile

Loads the specified Windows PowerShell console file. To create a console file, use the Export-Console cmdlet in Windows PowerShell.

Export-Console

The Export-Console cmdlet exports the names of the Windows PowerShell snap-ins in the current session to a Windows PowerShell console file (.psc1). You can use this cmdlet to save the snap-ins for use in future sessions. To add the snap-ins in the .psc1 console file to a session, start Windows PowerShell (Powershell.exe) at the command line by using Cmd.exe or another Windows PowerShell session, and then use the PSConsoleFile parameter of Powershell.exe to specify the console file.

100% Ensurepass Free Download!
Download Free Demo:70-680 Demo PDF
100% Ensurepass Free Guaranteed!
70-680 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.