Ensurepass.com : Ensure you pass the IT Exams
2018 Aug Microsoft Official New Released 70-680
100% Free Download! 100% Pass Guaranteed!

TS: Windows 7, Configuring

Question No: 281 – (Topic 3)

You have a computer named Computer1 that runs Windows 7 and Windows Internet Explorer 8.

A user reports that Computer1 has a number of Internet Explorer configuration issues that cause instability when browsing the Internet.

You need to configure Internet Explorer to use all default settings. What should you do from Internet Options?

  1. From the Advanced tab, click Reset.

  2. From the Programs tab, click Set programs.

  3. From the Advanced tab, click Restore advanced settings.

  4. From the Security tab, click Reset all zones to default level.

    Answer: A Explanation:

    Reset Internet Explorer settings

    By resetting Internet Explorer settings, you return Internet Explorer to the state it was in when it was first installed on your computer. This is useful for troubleshooting problems that might be caused by settings that were changed after installation. When you delete personal settings, some webpages that rely on previously stored cookies, form data, passwords, or previously installed browser add-ons might not work correctly. Resetting Internet Explorer to its default settings does not delete your favorites, feeds, Web Slices, and a few other personalized settings. See the table below for a complete list of all settings and information about whether they are reset or maintained. Resetting Internet Explorer#39;s settings is not reversible. After a reset, all previous settings are lost and cannot be recovered. Rather than resetting everything, you might want to reset specific settings or delete your webpage history. For more information, see the links at the bottom of this topic.

    To reset Internet Explorer settings

    1. Close any Internet Explorer or Windows Explorer windows that are currently open.

    2. Click to open Internet Explorer.

    3. Click the Tools button, and then click Internet Options.

    4. Click the Advanced tab, and then click Reset.

    5. Select the Delete personal settings check box if you would like to remove browsing history, search providers, Accelerators, home pages, and InPrivate Filtering data.

    6. In the Reset Internet Explorer Settings dialog box, click Reset.

    7. When Internet Explorer finishes restoring the settings, click Close, and then click OK.

    8. Close Internet Explorer.

      Your changes will take effect the next time you open Internet Explorer.

      Question No: 282 – (Topic 3)

      You perform a clean installation of Windows 7 on a computer.

      You need to ensure that you can run Windows XP Mode in Windows 7. What should you do?

      1. Enable hardware-assisted virtualization.

      2. Create a Data Execution Prevention (DEP) exception.

      3. Install Windows XP in the same partition as Windows 7.

      4. Install Windows XP in a different partition than Windows 7.

Answer: A Explanation:

Windows XP Mode requires a processor that supports hardware virtualization using either the AMD-V or Intel VT options. Most processors have this option disabled by default; to enable it, you must do so from the computer’s BIOS. After the setting has been configured, it is necessary to turn the computer off completely. The setting is not enabled if you perform a warm reboot after configuring BIOS. As 256 MB of RAM must be mallocated to the Windows XP Mode client, the computer running Windows 7 on which you deploy Windows XP Mode requires a minimum of 2 GB of RAM, which is more than the 1 GB of RAM Windows 7 hardware requirement.

Question No: 283 – (Topic 3)

You have a computer that has the following hardware configuration:

->1.6-gigahertz (GHz) processor (64-bit).

->8-GB RAM.

->500-GB hard disk.

->Graphics card that has 128-MB RAM.

You need to select an edition of Window 7 to meet the following requirements:

->Support DirectAccess

->Support Windows XP Mode

->Use all of the installed memory

Support joining an Active Directory domain. Which edition should you choose?

  1. Windows 7 Enterprise (64-bit)

  2. Windows 7 Enterprise (x86)

  3. Windows 7 Professional (64-bit)

  4. Windows 7 Ultimate (x86)

Answer: A Explanation:

The only applicable solution is Windows 7 Enterprise (64-bit) as for the following reasons:All versions are support Hardware wise.Requirements:Windows 7 Home Premium, Professional, Ultimate, and Enterprise editions have the following minimum hardware requirements:

  • 1 GHz 32-bit (x86) or 64-bit (x64) processor- 1 GB of system memory- A 40-GB hard disk drive (traditional or SSD) with at least 15 GB of available space- A graphics adapter that supports DirectX 9 graphics, has a Windows Display Driver Model (WDDM) driver,- Pixel Shader 2.0 hardware, and 32 bits per pixel and a minimum of 128 MB graphics memory

  • XP Mode

    Windows XP Mode is a downloadable compatibility option that is available for the Professional, Enterprise, and Ultimate editions of Windows 7. Windows XP Mode uses the latest version of Microsoft Virtual PC to allow you to run an installation of Windows XP virtually under Windows 7.

    Use all of the installed memory The x86 version supports a maximum of 4 GB of RAM, whereas the x64 version supports a maximum of 8 GB of RAM.

    Windows 7 ProfessionalWindows 7 Professional is available from retailers and on new computers installed by manufacturers. It supports all the features available in Windows Home Premium, but you can join computers with this operating system installed to a domain. It supports EFS and Remote Desktop Host but does not support enterprise features such as AppLocker, DirectAccess, BitLocker, and BranchCache.Windows 7 Enterprise and Ultimate Editions The Windows 7 Enterprise and Ultimate editions are identical except for the fact that Windows 7 Enterprise is available only to Microsoft’s volume licensing customers, and Windows 7 Ultimate is available from retailers and on new computers installed by manufacturers. The Enterprise and Ultimate editions support all the features available in other Windows 7 editions but also support all the enterprise features such as EFS, Remote Desktop Host, AppLocker, DirectAccess, BitLocker, BranchCache, and Boot from VHD.

    Question No: 284 – (Topic 3)

    You are evaluating the purchase a notebook computer that has the following hardware:

    ->1.6-gigahertz (GHz) 32-bit processor

    ->1024-MB RAM

    ->1 video card that uses shared memory

    ->4-GB solid state drive

    You need to ensure that you can install Windows 7 Enterprise on the notebook computer. Which hardware component should you change?

    1. hard disk

    2. processor

    3. RAM

    4. video card

    Answer: A Explanation:

    Hard Disk does not meet the minimum requirements.4-GB solid state drive!= 40-GB hard disk drive (traditional or SSD) with at least 15 GB of available

    spaceRequirements:Windows 7 Home Premium, Professional, Ultimate, and Enterprise editions have the following minimum hardware requirements:

    • 1 GHz 32-bit (x86) or 64-bit (x64) processor- 1 GB of system memory- A 40-GB hard disk drive (traditional or SSD) with at least 15 GB of available space- A graphics adapter that supports DirectX 9 graphics, has a Windows Display Driver Model (WDDM) driver,- Pixel Shader 2.0 hardware, and 32 bits per pixel and a minimum of 128 MB graphics

      Question No: 285 – (Topic 3)

      You have a computer that runs Windows 7 Professional.

      You need to upgrade the computer to Windows 7 Ultimate. You must achieve this goal in the minimum amount of time.

      What should you do?

      1. Run Windows Update.

      2. Run Windows Anytime Upgrade.

      3. From the Windows 7 installation media, run Setup.exe.

      4. From the Windows 7 installation media, run Migwiz.exe.

      Answer: B Explanation:

      Windows Anytime Upgrade With Windows Anytime Upgrade, shown in Figure,you can purchase an upgrade to an application over the Internet and have the features unlocked automatically. This upgrade method is more suitable for home users and users in small businesses where a small number of intra-edition upgrades is required.

      Ensurepass 2018 PDF and VCE

      Windows Anytime Upgrade

      Question No: 286 – (Topic 3)

      You have a computer that runs Windows 7. Multiple users share the computer. The computer contains a folder named C:\folder1.

      You need to identify all of the encrypted files in C:\folder1. Which command should you run?

      1. Cipher C:\folder1

      2. Dir C:\folder1 /OE

      3. Fsutil C:\folder1

      4. Wfs C:\folder1

      Answer: A Explanation:

      CipherDisplays or alters the encryption of folders and files on NTFS volumes. Used without parameters, cipher displays the encryption state of the current folder and any files it contains.

      Question No: 287 – (Topic 3)

      You have two computers named Computer1 and Computer2 that run Windows 7.

      You need to ensure that Computer2 has exactly the same firewall rules as Computer1. What should you do on Computer1?

      1. Run Winrm.exe quickconfig.

      2. From Windows Firewall with Advanced Security, select Export Policy.

      3. From Windows Firewall with Advanced Security, click Inbound Rules and then click Export List.

      4. Open Local Security Policy. Right-click IP Security Policies on Local Computer and then click Export List.

      Answer: B Explanation:

      Importing and Exporting Firewall ConfigurationMost organizations that use clients running Windows 7 apply firewall rules through Group Policy. In the event that you need to support a number of stand-alone clients running Windows 7, you can replicate complex firewall configurations using the WFAS Import Policy and Export Policy options. Importing and exporting policy also allows you to save the current firewall configuration state before you make changes to it. Exported policy files use the .wfw extension. Exported policies use a binary format, not Extensible Markup Language (XML) format like many other Windows 7 configuration files. You can also export and import firewall policies in the same .wfw format using the netsh advfirewall export or netsh advfirewall import commands.

      Question No: 288 – (Topic 3)

      You have a computer that runs Windows 7.

      You add a new hard disk drive to the computer and create a new NTFS partition. You need to ensure that you can use the Previous Versions feature on the new drive. What should you do?

      1. From Disk Management, convert the new disk to a dynamic disk.

      2. From System Properties, configure the System Protection settings.

      3. From System and Security, enable BitLocker Drive Encryption (BitLocker).

      4. From the properties of the new drive, create a share and modify the caching settings.

        Answer: B Explanation:

        System protection might not be turned on for the drive. If system protection is not turned on, Windows can#39;t create previous versions.To turn on system protection:

        1. Click to open System.2. In the left pane, click System protection. If you#39;re prompted for an administrator password or confirmation, type the password or provide confirmation.3. Click the drive, and then click Configure.4. Click Restore system settings and previous versions of files, and then click OK.

          Question No: 289 – (Topic 3)

          You have a computer that runs Windows 7.

          You need to capture the operating system and all the computer configurations to a Windows image (WIM) file.

          What should you do before you capture the image?

          1. Run Oscdimg.exe.

          2. Run Windows System Image Manager (Windows SIM).

          3. Open a command prompt that has elevated privileges.

          4. Start the computer by using Windows Preinstallation Environment (Windows PE).

      Answer: D Explanation:

      Windows PE To access a network share as an installation source from the client computer, you need to boot the client computer into the Windows Preintallation Environment (Windows PE) environment. The Windows PE environment is a minimally featured operating system that allows you to access diagnostic and maintenance tools as well as access network drives. Once you have successfully booted into the Windows PE environment, you can connect to the network share and begin the installation by running Setup.exe.NOT Windows SIMOpens Windows images, creates answer files, and manages distribution shares and configuration sets.NOT OscdimgOscdimg is a command-line tool for creating an image file (.iso) of a customized 32-bit or 64-bit version of Windows PE. You can then burn that .iso file to a CD-ROM or DVD-ROM. Oscdimg supports ISO 9660, Joliet, and Universal Disk Format (UDF) file systems.

      Question No: 290 – (Topic 3)

      You have three computers that run Windows 7.

      You use Windows PowerShell to perform remote administration tasks on all three computers.

      You need to remotely administer all three computers by using PowerShell. Which PowerShell cmdlet should you use?

      1. Enable-PSRemoting

      2. Enable-PSSessionConfiguration

      3. New-PSDrive

      4. New-PSSession

      Answer: D Explanation:

      New-PSSessionCreates a persistent connection to a local or remote computer. The New- PSSession cmdlet creates a Windows PowerShell session (PSSession) on a local or remote computer. When you create a PSSession, Windows PowerShell establishes a persistent connection to the remote computer. Use a PSSession to run multiple commands that share data, such as a function or the value of a variable. To run commands in a PSSession, use the Invoke-Command cmdlet. To use the PSSession to interact directly

      with a remote computer, use the Enter-PSSession cmdlet. You can run commands on a remote computer without creating a PSSession by using the ComputerName parameters of Enter-PSSession or Invoke-Command. When you use the ComputerName parameter, Windows PowerShell creates a temporary connection that is used for the interactive session or for a single command and is then closed.

      100% Ensurepass Free Download!
      Download Free Demo:70-680 Demo PDF
      100% Ensurepass Free Guaranteed!
      70-680 Dumps

      EnsurePass ExamCollection Testking
      Lowest Price Guarantee Yes No No
      Up-to-Dated Yes No No
      Real Questions Yes No No
      Explanation Yes No No
      PDF VCE Yes No No
      Free VCE Simulator Yes No No
      Instant Download Yes No No

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    This site uses Akismet to reduce spam. Learn how your comment data is processed.