Ensurepass.com : Ensure you pass the IT Exams
2018 July Microsoft Official New Released 70-642
100% Free Download! 100% Pass Guaranteed!

TS: Windows Server 2008 Network Infrastructure, Configuring

Question No: 241 – (Topic 3)

Your company has a single Active Directory domain. The domain has servers that run Windows Server 2008 R2.

You have a server named NAT1 that functions as a NAT server. You need to ensure that administrators can access a server named RDP1 by using Remote Desktop Protocol (RDP).

What should you do?

  1. Configure NAT1 to forward port 389 to RDP1.

  2. Configure NAT1 to forward port 1432 to RDP1.

  3. Configure NAT1 to forward port 3339 to RDP1.

  4. Configure NAT1 to forward port 3389 to RDP1.

Answer: D

Question No: 242 – (Topic 3)

Your network contains a server that runs a Server Core installation of Windows Server 2008 R2.

You need to configure outbound firewall rules on the server. Which tool should you use?

  1. ocsetup

  2. servermanagercmd

  3. netcfg

  4. netsh

Answer: D

Question No: 243 – (Topic 3)

Your company has a main office and one branch office. The main office has a print server named Printer1. The branch office has a print server named Printer2. Printer1 manages 15 printers and Printer2 manages seven printers.

You add Printer2 to the Print Management console on Printer1.

You need to send an automatic notification when a printer is not available. What should you do?

  1. Configure an e-mail notification for the Printers With Jobs printer filter.

  2. Configure an e-mail notification for the Printers Not Ready printer filter.

  3. Enable the Show informational notifications for local printers option on both print servers.

  4. Enable the Show informational notifications for network printers option on both print servers.

Answer: B

Question No: 244 – (Topic 3)

Your printing infrastructure is configured as shown in the following table.

You need to ensure that print jobs submitted by the members of Group1 print before queued print jobs submitted by the members of Group2.

What should you do?

  1. Modify the permissions assigned to Group2_Print.

  2. Change the priority of Group2_Print to 10.

  3. Change the priority of Group1_Print to 10.

  4. Configure Group1_Print to begin printing immediately.

  5. Configure Group2_Print to begin printing after the last page is spooled.

Answer: C Explanation:

Group 2 must be left with the lower printing priority for eg the default value = 1. http://technet.microsoft.com/en-us/library/cc738090(v=ws.10).aspx

Question No: 245 – (Topic 3)

You have a server that runs Windows Server 2008 R2.

You create a new quota template. You apply quotas to 100 folders by using the quota template. You need to modify the quota settings for all 100 folders.

You must achieve this goal by using the minimum amount of administrative effort. What should you do?

  1. Modify the quota template.

  2. Delete and recreate the quota template.

  3. Create a new quota template. Modify the quota for each folder.

  4. Create a file screen template. Apply the file screen template to the root of the volume that contains the folders.

Answer: A Explanation:

When you make changes to a quota template, you have the option of extending those changes to quotas that were created from the original quota template. You can choose to modify only those quotas that still match the original template or all quotas that were derived from the original template, regardless of any modifications that were made to the quotas since they were created. This feature simplifies the process of updating the properties of your quotas by providing one central point where you can make all the changes.

To edit quota template properties

  1. In Quota Templates, select the template that you want to modify.

  2. Right-click the quota template, and then click Edit Template Properties (or in the Actions pane, under

    Selected Quota Templates, select Edit Template Properties). This opens the Quota Template Properties dialog box.

  3. Perform all necessary changes. The settings and notification options are identical to those that you can set when you create a quota template. Optionally, you can copy the properties from a different template and modify them for this one.

  4. When you are finished editing the template properties, click OK. This will open the Update Quotas Derived from Template dialog box.

  5. Select the type of update that you want to apply:

  • If you have quotas that have been modified since they were created with the original template, and you do not want to change them, select Apply template only to derived quotas that match the original template. This option will update only those quotas that have not been edited since they were created with the original template.

  • If you want to modify all existing quotas that were created from the original template, select Apply template to all derived quotas.

  • If you want to keep the existing quotas unchanged, select Do not apply template to derived quotas.

    1. Click ok.

    http://technet.microsoft.com/en-us/library/cc754716.aspx

    Question No: 246 – (Topic 3)

    Your company has a network that has 100 servers. You install a new server that runs Windows Server 2008 R2. The server has the Web Server (IIS) server role installed.

    After a week, you discover that the Reliability Monitor has no data, and that the Systems Stability chart has never been updated.

    You need to configure the server to collect the Reliability Monitor data. What should you do?

    1. Run the perfmon.exe /sys command on the server.

    2. Configure the Task Scheduler service to start automatically.

    3. Configure the Remote Registry service to start automatically.

    4. Configure the Secondary Logon service to start automatically.

    Answer: B Explanation:

    Information that Reliability Monitor displays is provided by the RacTask task. By default, the RacTask task runs one time that is about one hour after you install the operating system. In Windows Server 2008 and in Windows Server 2008 R2, the trigger that regularly starts the RacTask task is disabled after the RacTask task runs for the first time.

    To resolve this issue, follow these steps:

    1. Click Start, type Task Scheduler in the Search box, and then click Task Scheduler. 2- Enable the trigger that regularly starts the RacTask task.

      1. In Task Scheduler, expand Task Scheduler Library, expand Microsoft, and then expand Windows.

      2. Right-click RAC, click View, and then click to select the Show Hidden Tasks command. Note If the Show Hidden Tasks command is already selected, go to step 2c.

      3. Double-click RacTask.

      4. In the RacTask Properties dialog box, click the Triggers tab. e- On the Triggers tab, double-click the One time trigger.

    f- In the Edit Trigger dialog box, click to select the Enabled option, and then click OK. g- In the RacTask Properties dialog box, click OK.

    h- Close Task Scheduler.

    3- Update a registry setting.

    a- Click Start, type Regedit in the Search box, and then click Regedit. b- In Registry Editor, set the value of the following registry entry to 1:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Reliability Analysis\WMI\WMIEnable 4- Restart the computer.

    http://support.microsoft.com/kb/983386/en-us

    Question No: 247 – (Topic 3)

    Your network contains an Active Directory domain named contoso.com.

    An administrator named Admin1 plans to install the Routing and Remote Access service (RRAS) role service on a server named Server1. Admin1s user account is not a member of the Domain Admins group.

    You need to ensure that Server1 can authenticate users from Active Directory by using Windows authentication.

    What should you do?

    1. Install the Active Directory Lightweight Directory Services (AD LDS) role on Server1.

    2. Add the computer account for Server1 to the RAS and IAS Servers group.

    3. Install the Network Policy Server (NPS) role service on a domain controller.

    4. Add the computer account for Server1 to the Windows Authorization Access Group.

    Answer: B Explanation:

    Not sure if I am right on this one, since not all question is shown ;)) But I guess that after adding the role by the Admin1 it says that he is not in Domain Admins group and RRAS server wont be added automatically to the RAS and IAS group, so it has to be added manually by a member of that group so server could authenticate users.

    Question No: 248 – (Topic 3)

    Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2008 R2.

    The network contains a DHCP server named DHCP1 on a subnet named Subnet1. You implement a new subnet named Subnet2. Subnet2 contains a server named Server1. On DHCP1, you create a DHCP scope for Subnet2.

    You need to configure Server1 to ensure that the client computers on Subnet2 can receive IP addresses from DHCP1.

    What should you install on Server1?

    1. the Application Server server role

    2. the DHCP server role

    3. the Network Policy Server (NPS) role service

    4. the Routing and Remote Access service (RRAS) role service

    Answer: D

    Question No: 249 – (Topic 3)

    Your network contains a server that has the Network Policy Server (NPS) role service installed.

    You need to configure a network policy that will apply to wireless clients only. Which condition should you configure?

    1. NAS port Type

    2. Service Type

    3. MS-Service Class

    4. Framed Protocol

    5. NAS Identifier

    Answer: A

    Question No: 250 – (Topic 3)

    Your network contains an Active Directory domain named Contoso.com. Contoso.com contains an enterprise certification authority (CA) named CA1.

    You enable Secure Socket Tunneling Protocol (SSTP) on a server named Server1.

    A user named User1 attempts to establish an SSTP connection to Server1 and receives the following error message: “Error 0x80092013: The revocation function was unable to check revocation because the revocation server was offline.”

    You verify that all certificates services are online.

    You need to ensure that User1 can connect to Server1 by using SSTP. What should you do first?

    1. Configure a pre-shared key for IPSec on User1s computer.

    2. Publish the certificate revocation list distribution point (CDP) to a location that is accessible from the Internet.

    3. Configure User1 for certificate autoenrollment.

    4. Add a certificate to Server1 that contains server1.contoso.com as a Subject Alternative Name (SAN).

    Answer: B

    Explanation:

    Client tries to connect to SSTP VPN server and it fails to connect giving error message 0x80092013:

    Trouble-shooting steps: This will happen if client is failing the certificate revocation check of the SSL certificate obtained from server side. Ensure the CRL check servers on the server side are exposed on the Internet. This is because CRL check is done on the client side during SSL connection establishment phase and the CRL check query will be directly going on the Internet.

    http://support.microsoft.com/kb/961880

    100% Ensurepass Free Download!
    Download Free Demo:70-642 Demo PDF
    100% Ensurepass Free Guaranteed!
    70-642 Dumps

    EnsurePass ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    This site uses Akismet to reduce spam. Learn how your comment data is processed.